The Dual Gun AC EV Charger Station is a cutting-edge charging solution designed for electric vehicles (EVs). Here are its key features:
Dual Gun Charging Capability: The charger station is equipped with two charging guns, allowing two electric vehicles to be charged simultaneously. This feature enhances convenience and reduces waiting time, making it ideal for high-traffic areas or locations with a large number of EVs.
Smart Functions: Wifi/Blue Tooth APP Controlling, Touchable Screen, OCPP 16.J, Commercial Use Payment Collecting, etc.
AC Charging Compatibility: The charger station supports AC charging, which is the most common charging method for EVs. It is compatible with a wide range of electric vehicles, making it suitable for diverse fleets and EV models.
CHARGING PILE | EV CONNECTOR | CORE ADVANTAGE | ||
LCD screen Easy installation High touching Screen compatibility Waterproof grade: IP5 4 | Built in temperature monitoring Good conductivity | RCD: Type B | ||
Small size, Easy to transport Multiple security protection Certified by authorities | PVC CABLE | Directional current regulation | ||
Real- time monitor on temperature | Durable and anticorrosion Easy to bend, Long service life | Repair the disorder of capacitor units Full- link temperature monitoring system Strong Expansibility | ||
High resistance to cold/ high temperature |
It allowing for interoperability between different charging station manufacturers and network operators.
One of the key features of OCPP 1.6J is its support for smart charging capabilities. This enables advanced functionalities such as load management, demand response, and dynamic pricing. With smart charging, charging stations can optimize their energy usage, respond to grid conditions, and provide value-added services to EV owners and grid operators.
OCPP 1.6J has gained widespread adoption and is supported by various vendors, charging network operators, and industry organizations. Its standardized nature promotes interoperability, scalability, and future-proofing of EV charging infrastructure. The protocol continues to evolve, with newer versions being developed to address emerging requirements and technologies in the rapidly evolving electric mobility sector.
NOTE: The above customization has quantity requirements, please confirm with sales staff for details.
1. It has card swiping start and remote stop start, and is equipped with rechargeable IC card.
2. Reservation charging function, which can be charged regularly according to user needs, and it will automatically end when fully charged.
3. Equipped with display screen, real-time display of charging information estimation Fill time.
4. With overload protection, overvoltage protection, undervoltage protection,short circuit protection, overtemperature protection, emergency stop and other functions.
Temperature Monitoring
Monitor the working temperature of the charger at all times, Once the safe temperature is exceeded,the charger will stop working immediately, and the charging system can be auto- resumed when the temperature returns to normal.
Automatically Repair Faults
Smart chip can automatically repair common charging mistakes to ensure stable opera tion of the production.
Complete Certification
The product has passed all relevant certifications, ensuring that the product can be sold and used with confidence.
Stand
The product has a supporting stand,which is easy for installation and outdoor use without the walls.
APP control
All the charging parameters could be set and showed on the APP. It will be convenient for operation.Also the charging system will be upgrade through APP.
CHARGING PARAMETER
SETTINGS
Charging parameter settings could berecorded in APP and auto used for each charging
The 4 main charging parameter settingsinclude:
1 . Current setting
2 . Over voltage protection
3 . Under voltage protection
4 . Grounding setting
CHARGING
Could display the chargingduration and amount in each
PLAN A:
If a power distribution box is used,the L1,L2,L3,N,and PE ends of the input cable of the plug correspond to the L1,L2,L3,N,and PE ends of the circuit breaker respectively.
PLAN B:
If the joint is connected , the two ends need to be connectednote that L1 L2 L3 N , Pcorrespond to each other Crimping pliers ensure good contact at extrusion joint
Specification for electrical box at input:
◎ The power distribution box at the input end of each AC charging pile shall be equipped with leakage air switch with rated current no less than 1 0 0 A.
◎ Select an adaptive molded case circuit breaker according to the current of the AC charging pile (3 2 A required for a single AC pile).
◎ Power cables for ac charging piles ( cables between air breakers and AC piles) must meet the rated capacity of at least 3 2 A single - phase power is recommended. The recommended voltage range is AC230V±10% .
◎ 50Hz power supply, make use of 5*16mm²coppercorecable; Wheninstalling AC charging piles, ensure that the PE cables are properly grounded.
NOTE:
1. After the vehicle is fully charged,the device will automatically Stop charging. 2. Please read the instructions carefully before use.
◎ IEC 61851-1:2017-02《Electric vehicle conductive charging system-Part 1: General requirements》
◎ IEC 62053-21:2003《Electricity metering equipment(a.c.)- Particular requirements-Part21:Static meters for active energy(classes 1 and 2 ) 》
◎ EN 50065-1:2001《 Signalling on low-voltage electrical installations in the frequency range3 kHz to 148,5kHz-Part 1:General requirements,frequency bands and electromagneticdisturbances》
◎ EN 50557:2011《 Requirements for automatic reclosing devices(ARDs)for circuit breakers-RCBOS-RCCBs for household and
similar uses》
◎ IEC 60050-151:2001《 International Electrotechnical Vocabulary- Part 151:EIectrical and magnetic devices》
◎ IEC 60050-195:1998《 International Electrotechnical Vocabulary-Part 195:Earthing and protection against electric shock》
◎ IEC 60050-441:1984《 International Electrotechnical Vocabulary-Par 441:Switchgear,controlgear and fuses》
◎ IEC 60050-826:2004《 International Electrotechnical Vocabulary-Part 826:Electrical installations》
◎ IEC 62196-2:2011-10《 Plugs,socket-outlets,vehicle connectors and vehicle-Conductive charging of electric cehicles-Part2:
◎ Dimensional compatibility and interchangeability requirements for a.c.pin and contact-tube accessories》
EVCOME has digital 2.0 production workshop and a professional R&D team with an annual production capacity of 200k pieces.
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.