PRODUCTS
VR
  • Product Details


CHARGING PILE
EV CONNECTOR
CORE ADVANTAGE

LCD screen Easy installation High

touching Screen  compatibility Waterproof grade: IP5 4

Built in temperature monitoring Good conductivityRCD: Type B
Small size, Easy to transport Multiple security protection Certified by authoritiesPVC CABLEDirectional current regulation
Real- time monitor on temperatureDurable  and   anticorrosion Easy to bend, Long service lifeRepair  the  disorder  of  capacitor  units  Full- link temperature monitoring system Strong Expansibility

High resistance to cold/ high temperature


PRODUCT OVERVIEW



It  allowing for interoperability between different charging station manufacturers and network operators.


One of the key features of OCPP 1.6J is its support for smart charging capabilities. This enables advanced functionalities such as load management, demand response, and dynamic pricing. With smart charging, charging stations can optimize their energy usage, respond to grid conditions, and provide value-added services to EV owners and grid operators.


OCPP 1.6J has gained widespread adoption and is supported by various vendors, charging network operators, and industry organizations. Its standardized nature promotes interoperability, scalability, and future-proofing of EV charging infrastructure. The protocol continues to evolve, with newer versions being developed to address emerging requirements and technologies in the rapidly evolving electric mobility sector.


ABOUT CUSTOMIZATION


                                   

               LOGO in the Display

                                  

             Product Name plate LOGO

                            

     Packing Box  Sticker Customization

                                     

              Manual Customization


NOTE: The above customization has quantity requirements, please confirm with sales staff for details.


PRODUCT PARAMETERS

                                                          

   


PRODUCT FUNCTION


1. It has card swiping start and remote stop start, and is equipped with rechargeable IC card.

2. Reservation charging function, which can be charged regularly according to user needs, and it will automatically end when fully charged.

3. Equipped with display screen, real-time display of charging information estimation Fill time.

4. With overload protection, overvoltage protection, undervoltage protection,short circuit protection, overtemperature protection, emergency stop and other functions.


PRODUCT CHARACTERISTIC


Temperature Monitoring

Monitor the working temperature of the charger at all times, Once the safe temperature is exceeded,the charger will stop working immediately,and the charging system can be  auto-resumed when the temperature returns to normal.


Automatically Repair Faults

Smart chip can automatically repair common charging mistakes to ensure stable opera tion of the production.


Complete Certification

The product has passed all relevant certifications, ensuring that the product can be sold and used with confidence.


Stand

The product has a supporting stand,which is easy for installation and outdoor use without the walls.


APP control

All the charging parameters could be set and showed on the APP. It will be convenient for operation.Also the charging system will be upgrade through APP.


PRODUCT DESCRIPTION


               
Remote control by APP

Charging can be started or stopped via Bluetooth or WIFI



               
Charging History Record

Query charging history anytime, anywhere



               
Charging Time Setting

Freely set the charging time and duration



               
Grounding protection setting

Freely set grounding protection or not


CHARGING PARAMETER

SETTINGS


Charging parameter settings could berecorded in APP and auto used for each charging


The 4 main charging parameter settingsinclude:


1 . Current setting

2 . Over voltage protection

3 . Under voltage protection

4 . Grounding setting

CHARGING


Could display the chargingduration and amount in each


STEPS FOR WIRING


PLAN A:  

If a power distribution box is used,the L1,L2,L3,N,and PE ends of the input cable of the plug correspond to the L1,L2,L3,N,and PE ends of the circuit breaker respectively.



PLAN B:  

If the joint is connected , the two ends need to be connected, note that L1, L2, L3, N  and PE, corresponding  to each other Crimping pliers ensure good contact at extrusion joint


INSTALLATION INSTRUCTIONS


Specification for electrical box at input: 

◎  The power distribution box at the input end of each AC charging pile shall be equipped with leakage air switch with rated current no less than 100A. 

◎  Select an adaptive molded case circuit breaker according to the current of the AC charging pile (32 A required for a single AC pile). 

◎  Power cables for ac charging piles ( cables between air breakers and AC piles) must meet the rated capacity of at least 32 A single - phase power is recommended. The recommended voltage range is AC230V±10% . 

◎  50Hz power supply, make use of 5*16mm²coppercorecable; Wheninstalling AC charging piles, ensure that the PE cables are properly grounded.


INSTALLATION ICON


                
               


               



               



                 
               



STEPS FOR USAGE


               


1. Make sure the charging box is connected power.

               


2 . Connect the EV and the charging box with the EV charging cable.

               


3 .Use swipe card or APP to start.


               


4.The vehicle is charged normally

               


5.Click the APP or swipe the card to end

               


6.Unplug the device and wrap the cable around the hook.


NOTE: 

1. After the vehicle is fully charged,the device will automatically Stop charging. 2. Please read the instructions carefully before use.


STANDARD


◎   IEC 61851-1:2017-02《Electric vehicle conductive charging system-Part 1: General requirements》

◎   IEC 62053-21:2003《Electricity metering equipment(a.c.)- Particular requirements-Part21:Static meters for active energy(classes 1 and 2 ) 》

◎   EN 50065-1:2001《 Signalling on low-voltage electrical installations in the frequency range3 kHz to 148,5kHz-Part 1:General requirements,frequency bands and electromagneticdisturbances》

◎   EN 50557:2011《 Requirements for automatic reclosing devices(ARDs)for circuit breakers-RCBOS-RCCBs for household and

similar uses》

◎   IEC 60050-151:2001《 International Electrotechnical Vocabulary- Part 151:EIectrical and magnetic devices》

◎   IEC 60050-195:1998《 International Electrotechnical Vocabulary-Part 195:Earthing and protection against electric shock》

◎   IEC 60050-441:1984《 International Electrotechnical Vocabulary-Par 441:Switchgear,controlgear and fuses》

◎   IEC 60050-826:2004《 International Electrotechnical Vocabulary-Part 826:Electrical installations》

◎   IEC 62196-2:2011-10《 Plugs,socket-outlets,vehicle connectors and vehicle-Conductive charging of electric cehicles-Part2:

◎   Dimensional compatibility and interchangeability requirements for a.c.pin and contact-tube accessories》

Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Recommended

Send your inquiry

LEAVE A MESSAGE

EVCOME has digital 2.0 production workshop and a professional R&D team with an annual production capacity of 200k pieces.

Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.

Recommended
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.
Chat with Us

Send your inquiry

Choose a different language
English
اردو
Türkçe
ภาษาไทย
Magyar
русский
Português
italiano
français
Español
Deutsch
العربية
日本語
한국어
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
Pilipino
Українська
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English