VR
  • Product Details


PRODUCT DETAIL


An EV wall charger, also known as an electric vehicle wall charger or EV charging station, is a dedicated charging device designed specifically for electric vehicles. Here are the key features and descriptions of an EV wall charger:

 

■   High Power Output: 

EV wall chargers are capable of delivering high power output to charge electric vehicles efficiently. They typically support power levels ranging from 3.7 kW to 22 kW or higher, allowing for faster charging compared to standard electrical outlets.

 

■   Charging Speed and Efficiency: 

EV wall chargers provide faster charging times compared to standard outlets. They utilize advanced charging protocols, such as SAE J1772, CHAdeMO, or Combined Charging System (CCS), to ensure efficient and reliable charging of electric vehicles.

 

■   Dedicated Charging Station:

EV wall chargers are installed as a fixed charging station in a residential or commercial setting. They provide a dedicated and convenient location for charging electric vehicles, eliminating the need to rely on public charging infrastructure.

 

■   Safety Features: 

EV wall chargers incorporate multiple safety features to protect the vehicle, the charger, and the user. These features include ground fault protection, overcurrent protection, overvoltage protection, and temperature monitoring. These mechanisms ensure safe and secure charging operations.

 

■   Smart Connectivity: 

Some EV wall chargers offer smart connectivity options, allowing users to monitor and control the charging process remotely. This may include features like smartphone apps or web-based platforms that provide real-time charging status updates, scheduling, and energy usage monitoring.

 

■   Compatibility: 

EV wall chargers are designed to be compatible with various electric vehicle models and brands. They support standard charging connectors, such as Type 1 (SAE J1772) or Type 2 (IEC 62196), ensuring compatibility with a wide range of electric vehicles.

 

■   User-Friendly Design: 

EV wall chargers are designed with user convenience in mind. They often feature user-friendly interfaces, easy-to-read displays, and intuitive controls for a hassle-free charging experience.

 

■   Weatherproof and Durability: 

EV wall chargers are built to withstand outdoor conditions and are often weatherproof or housed in protective enclosures. They are designed to be durable and reliable, capable of enduring various environmental factors.

 

Overall, an EV wall charger provides a dedicated and efficient charging solution for electric vehicles, offering fast charging speeds, enhanced safety features, and convenience for EV owners.


PRODUCT CHARACTERISTIC


☆  Convenient Control
TIME: Press the button once means it will charge 1 hour, press 9 times at most.
CURRENT: It can switch 5 current (6A/8A/10A/13A/16A) to charge your car.
DELAY:Press once to delay for 1 hour, you can press 9 times at most.

☆  LED Display
LED display could show the real-time charging status, including time, voltage, current, power and temperature.

☆  Adjustable Current
Customers could adjust different current as their request.Also the charger which equipped the adaptor could automatically identify different plug types and control the current upper limit to keep safe.

☆  Type B (Type A + DC 6mA)
The special "self-clean" design. The impurities on the surface of the pins can be removed in each plug-in process. It could also effectively reducing the generation of the electric sparks.

☆  Full Link Temperature Monitoring System
Besen's original "full link" temperature control system can protect the temperature of 75 ° and cut off the current for 0.2S when temperature over 75°.

☆  Automatically Intelligent Repair
The smart chip is equipped to automatically repair common charging errors. It could also restart the power to protect the device from stopping charge caused by voltage fluctuation.

☆  IP66, Rolling-resistance System
Rugged shell which could resist the rolling and crash of the car.
IP66 ensure the perfect work outdoors in any environment including rain and snow.

☆  Temperature Monitoring
Real-time monitor is equipped to detect the temperature of the car-end and the wall-end plugs.
Once the temperature is detected above 80℃, the current will be cut off immediately. When the temperature returns below 50℃, charging will resume off.

☆  Battery Protection
Accurate monitoring of PWM signal changes, Effective repair of capacitor units, Maintenance of battery life.



PRODUCT DISPLAY


Product advantages:

Varied colors can be customized

Smart Residential/Commercial Use OCPP1.6J

Plug and Charge, RFID, APP, Multifunction

Original Design, Light & Compact, Instant Info Monitoring

       


               
Product description
               
Product description
               
Product description


               
Product description
               
Product description
               
Product description


INSTALLATION STEPS


               
1. Drill holes using the drilling template
               
2. Hammer the M6.0 expansion tube intothe wall hole


               
3. Use the screwdriver to fix the M4.0 self tapping screwsto the backplane  on the wall
               
4. Install the charging pile on the backplane on the wall


               
5.Lock the anti-theft screw on the top of the charging pile, and place the plug seat in an appropriate place
               
6. After completing the above steps,  the surface protective film of the charging pile can be torn off


INSTALLATION INSTRUCTIONS


Specification for electrical box at input:

■   The power distribution box at the input end of each AC charging pile shall beequippedwith leakage air switch with rated current no less than 40A.

■   Select an adaptive molded case circuit breaker according to the current of the ac charging pile (32A required for a single ac pile).

■   Power cables for ac charging piles (cables between air breakers and ac piles) must meet the rated capacity of at least 32 a. single-phase power is recommended. The recommended voltage range is AC230V±10% .

■   50Hz power supply, make use of 6mm² copper core cable; When installing acchargingpiles, ensure that the PE cables are properly grounded.


WIRE CONNECTION INSTRUCTIONS


Method 1:

If the power distribution box is connected, connect the L, N, and PE ends of he inputlinethe L, N, and PE ends of the circuit breaker respectively.



Method 2:

If the joint is connected, the two ends need to be connectedNote that L, N and PE, corresponding to each other Crimping pliers ensure good contact at extrusion joint.



CHARGING INSTRUCTIONS


               
1. Make sure the charging pile is properly connected to the power supply
               
2. Put the charging plug Connect the on-board charging interface
               
3. Swipe start


               
4. End of swipe
               
5. Unplug the charging plug
               
6. Unplug the charging plug put it back


CUSTOMER SERVICE


◎  We can provide customers with professional product advice and purchase options.

◎  All emails will be responded within 24 hours during working days.
◎  We have online customer service in English, French, German and Spanish. You can communicate with ease, or contact us through email anytime.
◎  All customers will get one-on-one service.


Delivery Time
◎  We have warehouses throughout Europe and North America.
◎  Samples or test orders can be delivered within 2-5 working days.
◎  Orders in standard products above 100pcs could be delivered within 7-15 working days.
◎  Orders that require customization could be produced within 20-30 working days.


Customized Service
◎  We provide flexible customized services with our abundant experiences in kinds of OEM and ODM projects.
◎  OEM includes color, length, logo, packaging, etc.
◎  ODM includes product appearance design, function setting, new product development, etc.
◎  MOQ is depend on different customized requests.


The Agency Policy
◎  Please contact our sales department for more details.


After Sale Service
◎  The warranty of all our products is one year. The specific after-sale plan will be free for replacement or charging a certain maintenance cost according to the specific situations.
◎  However, according to the feedback from markets, we seldom have after-sale problems because strict product inspections are carried out before leaving the factory. And all of our products are certificated by top testing institutions such as CE from Europe and CSA from Canada. Providing safe and guaranteed products is always one of our greatest strengths.


Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Recommended

Send your inquiry

LEAVE A MESSAGE

EVCOME has digital 2.0 production workshop and a professional R&D team with an annual production capacity of 200k pieces.

Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.

Recommended
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.
Chat with Us

Send your inquiry

Choose a different language
English
اردو
Türkçe
ภาษาไทย
Magyar
русский
Português
italiano
français
Español
Deutsch
العربية
日本語
한국어
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
Pilipino
Українська
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English