|CHARGING PILE||EV CONNECTOR||CORE ADVANTAGE|
LCD screen Easy installation High
touching Screen compatibility Waterproof grade: IP5 4
|Built in temperature monitoring Good conductivity||RCD: Type B|
|Small size, Easy to transport Multiple security protection Certified by authorities||PVC CABLE||Directional current regulation|
|Real- time monitor on temperature||Durable and anticorrosion Easy to bend, Long service life||Repair the disorder of capacitor units Full- link temperature monitoring system Strong Expansibility|
|High resistance to cold/ high temperature|
It allowing for interoperability between different charging station manufacturers and network operators.
One of the key features of OCPP 1.6J is its support for smart charging capabilities. This enables advanced functionalities such as load management, demand response, and dynamic pricing. With smart charging, charging stations can optimize their energy usage, respond to grid conditions, and provide value-added services to EV owners and grid operators.
OCPP 1.6J has gained widespread adoption and is supported by various vendors, charging network operators, and industry organizations. Its standardized nature promotes interoperability, scalability, and future-proofing of EV charging infrastructure. The protocol continues to evolve, with newer versions being developed to address emerging requirements and technologies in the rapidly evolving electric mobility sector.
LOGO in the Display
Product Name plate LOGO
Packing Box Sticker Customization
NOTE: The above customization has quantity requirements, please confirm with sales staff for details.
1. It has card swiping start and remote stop start, and is equipped with rechargeable IC card.
2. Reservation charging function, which can be charged regularly according to user needs, and it will automatically end when fully charged.
3. Equipped with display screen, real-time display of charging information estimation Fill time.
4. With overload protection, overvoltage protection, undervoltage protection,short circuit protection, overtemperature protection, emergency stop and other functions.
Monitor the working temperature of the charger at all times, Once the safe temperature is exceeded,the charger will stop working immediately, and the charging system can be auto- resumed when the temperature returns to normal.
Automatically Repair Faults
Smart chip can automatically repair common charging mistakes to ensure stable opera tion of the production.
The product has passed all relevant certifications, ensuring that the product can be sold and used with confidence.
The product has a supporting stand,which is easy for installation and outdoor use without the walls.
All the charging parameters could be set and showed on the APP. It will be convenient for operation.Also the charging system will be upgrade through APP.
Remote control by APP
Charging can be started or stopped via Bluetooth or WIFI
Charging History Record
Query charging history anytime， anywhere
Charging Time Setting
Freely set the charging time and duration
Grounding protection setting
Freely set grounding protection or not
Charging parameter settings could berecorded in APP and auto used for each charging
The 4 main charging parameter settingsinclude:
1 . Current setting
2 . Over voltage protection
3 . Under voltage protection
4 . Grounding setting
Could display the chargingduration and amount in each
If a power distribution box is used,the L, N and PE ends of the input cable of the plug correspond to the L, N and PE ends of the circuit breaker respectively.
If the joint is connected , the two ends need to be connected, note that L, N and PE, corresponding to each other Crimping pliers ensure good contact at extrusion joint
Specification for electrical box at input：
◎ The power distribution box at the input end of each AC charging pile shall be equipped with leakage air switch with rated current no less than 100 A.
◎ Select an adaptive molded case circuit breaker according to the current of the AC charging pile (32 A required for a single AC pile).
◎ Power cables for ac charging piles ( cables between air breakers and AC piles) must meet the rated capacity of at least 32 A single - phase power is recommended. The recommended voltage range is AC230V±10% .
◎ 50Hz power supply, make use of 5*16mm²coppercorecable; Wheninstalling AC charging piles, ensure that the PE cables are properly grounded.
Drill holes using the drilling template
Hammer the M6 .0 expansion tube intothe wall hole
Use the screwdriver to fix the M4.0 self tapping screwsto the backplane on the wall
Install the charging pile on the backplane on the wall
Lock the anti- theft screw on the top of the charging pile, and place the plug seat in an appropriate place
After completing the above steps , the surface protective film of the charging pile can be torn off.
1. Make sure the charging box is connected power.
2 . Connect the EV and the charging box with the EV charging cable.
3 .Use swipe card or APP to start.
4.The vehicle is charged normally
5.Click the APP or swipe the card to end
6.Unplug the device and wrap the cable around the hook.
1. After the vehicle is fully charged,the device will automatically Stop charging. 2. Please read the instructions carefully before use.
◎ IEC 61851-1:2017-02《Electric vehicle conductive charging system-Part 1: General requirements》
◎ IEC 62053-21:2003《Electricity metering equipment(a.c.)- Particular requirements-Part21:Static meters for active energy(classes 1 and 2 ) 》
◎ EN 50065-1:2001《 Signalling on low-voltage electrical installations in the frequency range3 kHz to 148,5kHz-Part 1:General requirements,frequency bands and electromagneticdisturbances》
◎ EN 50557:2011《 Requirements for automatic reclosing devices(ARDs)for circuit breakers-RCBOS-RCCBs for household and
◎ IEC 60050-151:2001《 International Electrotechnical Vocabulary- Part 151:EIectrical and magnetic devices》
◎ IEC 60050-195:1998《 International Electrotechnical Vocabulary-Part 195:Earthing and protection against electric shock》
◎ IEC 60050-441:1984《 International Electrotechnical Vocabulary-Par 441:Switchgear,controlgear and fuses》
◎ IEC 60050-826:2004《 International Electrotechnical Vocabulary-Part 826:Electrical installations》
◎ IEC 62196-2:2011-10《 Plugs,socket-outlets,vehicle connectors and vehicle-Conductive charging of electric cehicles-Part2:
◎ Dimensional compatibility and interchangeability requirements for a.c.pin and contact-tube accessories》