wholesale AC EV Charger suppliers for sale | EVCOME
  • wholesale AC EV Charger suppliers for sale | EVCOME

wholesale AC EV Charger suppliers for sale | EVCOME

Over the years, in line with the operating principle of "integrity management, winning by quality", we insist on selecting the highest quality raw materials, and adopt first-class manufacturing technology and technology to produce products. Long service life, compared with other similar products, the overall cost performance is higher.
Products Details
  • Feedback
  • After years of solid and rapid development, EVCOME has grown into one of the most professional and influential enterprises in China. AC EV Charger suppliers EVCOME is a comprehensive manufacturer and supplier of high-quality products and one-stop service. We will, as always, actively provide prompt services such. For more details about our AC EV Charger suppliers and other products, just let us know.AC EV Charger suppliers The material is carefully selected, the workmanship is fine, the appearance is beautiful, the quality is stable, and the surface has been specially treated with fine processing technology, the texture is uniform and thick, and the details are full of high-end quality.


    CHARGING PILE
    EV CONNECTOR
    CORE ADVANTAGE

    LCD screen Easy installation High

    touching Screen  compatibility Waterproof grade: IP5 4

    Built in temperature monitoring Good conductivityRCD: Type B
    Small size, Easy to transport Multiple security protection Certified by authoritiesPVC CABLEDirectional current regulation
    Real- time monitor on temperatureDurable  and   anticorrosion Easy to bend, Long service lifeRepair  the  disorder  of  capacitor  units  Full- link temperature monitoring system Strong Expansibility

    High resistance to cold/ high temperature


    PRODUCT OVERVIEW



    It  allowing for interoperability between different charging station manufacturers and network operators.


    One of the key features of OCPP 1.6J is its support for smart charging capabilities. This enables advanced functionalities such as load management, demand response, and dynamic pricing. With smart charging, charging stations can optimize their energy usage, respond to grid conditions, and provide value-added services to EV owners and grid operators.


    OCPP 1.6J has gained widespread adoption and is supported by various vendors, charging network operators, and industry organizations. Its standardized nature promotes interoperability, scalability, and future-proofing of EV charging infrastructure. The protocol continues to evolve, with newer versions being developed to address emerging requirements and technologies in the rapidly evolving electric mobility sector.



    PRODUCT PARAMETERS


               


    PRODUCT FUNCTION


    1. It has card swiping start and remote stop start, and is equipped with rechargeable IC card.

    2. Reservation charging function, which can be charged regularly according to user needs, and it will automatically end when fully charged.

    3. Equipped with display screen, real-time display of charging information estimation Fill time.

    4. With overload protection, overvoltage protection, undervoltage protection,short circuit protection, overtemperature protection, emergency stop and other functions.


    PRODUCT CHARACTERISTIC


    Temperature Monitoring

    Monitor the working temperature of the charger at all times, Once the safe temperature is exceeded,the charger will stop working immediately, and the charging system can be auto- resumed when the temperature returns to normal.


    Automatically Repair Faults

    Smart chip can automatically repair common charging mistakes to ensure stable opera tion of the production.


    Complete Certification

    The product has passed all relevant certifications, ensuring that the product can be sold and used with confidence.


    Stand

    The product has a supporting stand,which is easy for installation and outdoor use without the walls.


    APP control

    All the charging parameters could be set and showed on the APP. It will be convenient for operation.Also the charging system will be upgrade through APP.



    Installation wiring instructions


    NOTE:  

    The wiring needs to meet the following requirements: 

    1.The charging station should have a separate distribution circuit and should not be shared with other electrical products. 

     2.11KW station inlet end cable requirements of 2.5mm2, 22KW inlet cable requirements of 6mm2, inlet crimping terminal. 

     3.In order to prevent electric shock, we should ensure that the input ground securely grounded in accordance with the installation instructions for installation, prohibit the use of two or three-core plugs in the front of the charging station.


    Note that in a three-phase 230V power supply environment without N wire, please short the blue N wire and the gray L3 wire L1 brown, L2 black, L3 gray, N blue, PE yellow-green two-color.

    Specification for electrical box at input: 

    ◎  The power distribution box at the input end of each AC charging pile shall be equipped with leakage air switch with rated current no less than 1 0 0 A. 

    ◎  Select an adaptive molded case circuit breaker according to the current of the AC charging pile (3 2 A required for a single AC pile). 

    ◎  Power cables for ac charging piles ( cables between air breakers and AC piles) must meet the rated capacity of at least 3 2 A single - phase power is recommended. The recommended voltage range is AC230V±10% . 

    ◎  50Hz power supply, make use of 5*16mm²coppercorecable; Wheninstalling AC charging piles, ensure that the PE cables are properly grounded.


    STANDARD


    ◎   IEC 61851-1:2017-02《Electric vehicle conductive charging system-Part 1: General requirements》

    ◎   IEC 62053-21:2003《Electricity metering equipment(a.c.)- Particular requirements-Part21:Static meters for active energy(classes 1 and 2 ) 》

    ◎   EN 50065-1:2001《 Signalling on low-voltage electrical installations in the frequency range3 kHz to 148,5kHz-Part 1:General requirements,frequency bands and electromagneticdisturbances》

    ◎   EN 50557:2011《 Requirements for automatic reclosing devices(ARDs)for circuit breakers-RCBOS-RCCBs for household and

    similar uses》

    ◎   IEC 60050-151:2001《 International Electrotechnical Vocabulary- Part 151:EIectrical and magnetic devices》

    ◎   IEC 60050-195:1998《 International Electrotechnical Vocabulary-Part 195:Earthing and protection against electric shock》

    ◎   IEC 60050-441:1984《 International Electrotechnical Vocabulary-Par 441:Switchgear,controlgear and fuses》

    ◎   IEC 60050-826:2004《 International Electrotechnical Vocabulary-Part 826:Electrical installations》

    ◎   IEC 62196-2:2011-10《 Plugs,socket-outlets,vehicle connectors and vehicle-Conductive charging of electric cehicles-Part2:

    ◎   Dimensional compatibility and interchangeability requirements for a.c.pin and contact-tube accessories》

    Basic Information
    • Year Established
      --
    • Business Type
      --
    • Country / Region
      --
    • Main Industry
      --
    • Main Products
      --
    • Enterprise Legal Person
      --
    • Total Employees
      --
    • Annual Output Value
      --
    • Export Market
      --
    • Cooperated Customers
      --
    Send your inquiry
    Chat with Us

    Send your inquiry

    Choose a different language
    English
    اردو
    Türkçe
    ภาษาไทย
    Magyar
    русский
    Português
    italiano
    français
    Español
    Deutsch
    العربية
    日本語
    한국어
    简体中文
    繁體中文
    Afrikaans
    አማርኛ
    Azərbaycan
    Беларуская
    български
    বাংলা
    Bosanski
    Català
    Sugbuanon
    Corsu
    čeština
    Cymraeg
    dansk
    Ελληνικά
    Esperanto
    Eesti
    Euskara
    فارسی
    Suomi
    Frysk
    Gaeilgenah
    Gàidhlig
    Galego
    ગુજરાતી
    Hausa
    Ōlelo Hawaiʻi
    हिन्दी
    Hmong
    Hrvatski
    Kreyòl ayisyen
    հայերեն
    bahasa Indonesia
    Igbo
    Íslenska
    עִברִית
    Basa Jawa
    ქართველი
    Қазақ Тілі
    ខ្មែរ
    ಕನ್ನಡ
    Kurdî (Kurmancî)
    Кыргызча
    Latin
    Lëtzebuergesch
    ລາວ
    lietuvių
    latviešu valoda‎
    Malagasy
    Maori
    Македонски
    മലയാളം
    Монгол
    मराठी
    Bahasa Melayu
    Maltese
    ဗမာ
    नेपाली
    Nederlands
    norsk
    Chicheŵa
    ਪੰਜਾਬੀ
    Polski
    پښتو
    Română
    سنڌي
    සිංහල
    Slovenčina
    Slovenščina
    Faasamoa
    Shona
    Af Soomaali
    Shqip
    Српски
    Sesotho
    Sundanese
    svenska
    Kiswahili
    தமிழ்
    తెలుగు
    Точики
    Pilipino
    Українська
    O'zbek
    Tiếng Việt
    Xhosa
    יידיש
    èdè Yorùbá
    Zulu
    Current language:English