EVCOME | Customize level 2 ac charger companies
  • EVCOME | Customize level 2 ac charger companies

EVCOME | Customize level 2 ac charger companies

level 2 ac charger Excellent material selection, exquisite workmanship, tight structure, high quality, strong bearing capacity, good corrosion resistance, quality and quality can stand the test of time and the market.
Products Details

Relying on advanced technology, excellent production capabilities, and perfect service, EVCOME takes the lead in the industry now and spreads our EVCOME all over the world. Together with our products, our services are also supplied to be the highest-level. level 2 ac charger EVCOME is a comprehensive manufacturer and supplier of high-quality products and one-stop service. We will, as always, actively provide prompt services such. For more details about our level 2 ac charger and other products, just let us know. always adheres to the production principle of 'professional, efficient and dedicated', actively learns advanced foreign manufacturing technology and processing technology, and strives to improve the performance and quality of existing products. The level 2 ac charger produced is excellent in workmanship, high in quality and durable , is very popular in the market.


CHARGING PILE
EV CONNECTOR
CORE ADVANTAGE

LCD screen Easy installation High

touching Screen  compatibility Waterproof grade: IP5 4

Built in temperature monitoring Good conductivityRCD: Type B
Small size, Easy to transport Multiple security protection Certified by authoritiesPVC CABLEDirectional current regulation
Real- time monitor on temperatureDurable  and   anticorrosion Easy to bend, Long service lifeRepair  the  disorder  of  capacitor  units  Full- link temperature monitoring system Strong Expansibility

High resistance to cold/ high temperature


PRODUCT OVERVIEW



It  allowing for interoperability between different charging station manufacturers and network operators.


One of the key features of OCPP 1.6J is its support for smart charging capabilities. This enables advanced functionalities such as load management, demand response, and dynamic pricing. With smart charging, charging stations can optimize their energy usage, respond to grid conditions, and provide value-added services to EV owners and grid operators.


OCPP 1.6J has gained widespread adoption and is supported by various vendors, charging network operators, and industry organizations. Its standardized nature promotes interoperability, scalability, and future-proofing of EV charging infrastructure. The protocol continues to evolve, with newer versions being developed to address emerging requirements and technologies in the rapidly evolving electric mobility sector.



PRODUCT PARAMETERS


           


PRODUCT FUNCTION


1. It has card swiping start and remote stop start, and is equipped with rechargeable IC card.

2. Reservation charging function, which can be charged regularly according to user needs, and it will automatically end when fully charged.

3. Equipped with display screen, real-time display of charging information estimation Fill time.

4. With overload protection, overvoltage protection, undervoltage protection,short circuit protection, overtemperature protection, emergency stop and other functions.


PRODUCT CHARACTERISTIC


Temperature Monitoring

Monitor the working temperature of the charger at all times, Once the safe temperature is exceeded,the charger will stop working immediately, and the charging system can be auto- resumed when the temperature returns to normal.


Automatically Repair Faults

Smart chip can automatically repair common charging mistakes to ensure stable opera tion of the production.


Complete Certification

The product has passed all relevant certifications, ensuring that the product can be sold and used with confidence.


Stand

The product has a supporting stand,which is easy for installation and outdoor use without the walls.


APP control

All the charging parameters could be set and showed on the APP. It will be convenient for operation.Also the charging system will be upgrade through APP.



Installation wiring instructions


NOTE:  

The wiring needs to meet the following requirements: 

1.The charging station should have a separate distribution circuit and should not be shared with other electrical products. 

 2.11KW station inlet end cable requirements of 2.5mm2, 22KW inlet cable requirements of 6mm2, inlet crimping terminal. 

 3.In order to prevent electric shock, we should ensure that the input ground securely grounded in accordance with the installation instructions for installation, prohibit the use of two or three-core plugs in the front of the charging station.


Note that in a three-phase 230V power supply environment without N wire, please short the blue N wire and the gray L3 wire L1 brown, L2 black, L3 gray, N blue, PE yellow-green two-color.

Specification for electrical box at input: 

◎  The power distribution box at the input end of each AC charging pile shall be equipped with leakage air switch with rated current no less than 1 0 0 A. 

◎  Select an adaptive molded case circuit breaker according to the current of the AC charging pile (3 2 A required for a single AC pile). 

◎  Power cables for ac charging piles ( cables between air breakers and AC piles) must meet the rated capacity of at least 3 2 A single - phase power is recommended. The recommended voltage range is AC230V±10% . 

◎  50Hz power supply, make use of 5*16mm²coppercorecable; Wheninstalling AC charging piles, ensure that the PE cables are properly grounded.


STANDARD


◎   IEC 61851-1:2017-02《Electric vehicle conductive charging system-Part 1: General requirements》

◎   IEC 62053-21:2003《Electricity metering equipment(a.c.)- Particular requirements-Part21:Static meters for active energy(classes 1 and 2 ) 》

◎   EN 50065-1:2001《 Signalling on low-voltage electrical installations in the frequency range3 kHz to 148,5kHz-Part 1:General requirements,frequency bands and electromagneticdisturbances》

◎   EN 50557:2011《 Requirements for automatic reclosing devices(ARDs)for circuit breakers-RCBOS-RCCBs for household and

similar uses》

◎   IEC 60050-151:2001《 International Electrotechnical Vocabulary- Part 151:EIectrical and magnetic devices》

◎   IEC 60050-195:1998《 International Electrotechnical Vocabulary-Part 195:Earthing and protection against electric shock》

◎   IEC 60050-441:1984《 International Electrotechnical Vocabulary-Par 441:Switchgear,controlgear and fuses》

◎   IEC 60050-826:2004《 International Electrotechnical Vocabulary-Part 826:Electrical installations》

◎   IEC 62196-2:2011-10《 Plugs,socket-outlets,vehicle connectors and vehicle-Conductive charging of electric cehicles-Part2:

◎   Dimensional compatibility and interchangeability requirements for a.c.pin and contact-tube accessories》

Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
اردو
Türkçe
ภาษาไทย
Magyar
русский
Português
italiano
français
Español
Deutsch
العربية
日本語
한국어
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
Pilipino
Українська
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English