customized best charger for electric car bulk buy | EVCOME
  • customized best charger for electric car bulk buy | EVCOME

customized best charger for electric car bulk buy | EVCOME

We insist on selecting high-quality raw materials, and use fine processing technology to manufacture axle products. The best charger for electric car produced is moderate in weight, accurate in size, excellent in workmanship, and reliable in quality, and is very popular in the market.
Products Details
  • Feedback
  • At EVCOME, technology improvement and innovation are our core advantages. Since established, we have been focusing on developing new products, improving product quality, and serving customers. best charger for electric car We promise that we provide every customer with high-quality products including best charger for electric car and comprehensive services. If you want to know more details, we are glad to tell you. Manufacture best charger for electric car in strict accordance with the national and industry standards, and arrange professional quality inspectors to conduct strict quality supervision and testing on all the finished axles produced to ensure that best charger for electric car put into the market are of excellent performance and reliable quality Qualified product.


    CHARGING PILE
    EV CONNECTOR
    CORE ADVANTAGE

    LCD screen Easy installation High

    touching Screen  compatibility Waterproof grade: IP5 4

    Built in temperature monitoring Good conductivityRCD: Type B
    Small size, Easy to transport Multiple security protection Certified by authoritiesPVC CABLEDirectional current regulation
    Real- time monitor on temperatureDurable  and   anticorrosion Easy to bend, Long service lifeRepair  the  disorder  of  capacitor  units  Full- link temperature monitoring system Strong Expansibility

    High resistance to cold/ high temperature


    PRODUCT OVERVIEW



    It  allowing for interoperability between different charging station manufacturers and network operators.


    One of the key features of OCPP 1.6J is its support for smart charging capabilities. This enables advanced functionalities such as load management, demand response, and dynamic pricing. With smart charging, charging stations can optimize their energy usage, respond to grid conditions, and provide value-added services to EV owners and grid operators.


    OCPP 1.6J has gained widespread adoption and is supported by various vendors, charging network operators, and industry organizations. Its standardized nature promotes interoperability, scalability, and future-proofing of EV charging infrastructure. The protocol continues to evolve, with newer versions being developed to address emerging requirements and technologies in the rapidly evolving electric mobility sector.


    ABOUT CUSTOMIZATION


             LOGO in the Display
            Product Name plate LOGO
    Packing Box StickerCustomization
                Manual Customization


    NOTE: The above customization has quantity requirements, please confirm with sales staff for details.


    PRODUCT PARAMETERS

                                                              

       


    PRODUCT FUNCTION


    1. It has card swiping start and remote stop start, and is equipped with rechargeable IC card.

    2. Reservation charging function, which can be charged regularly according to user needs, and it will automatically end when fully charged.

    3. Equipped with display screen, real-time display of charging information estimation Fill time.

    4. With overload protection, overvoltage protection, undervoltage protection,short circuit protection, overtemperature protection, emergency stop and other functions.


    PRODUCT CHARACTERISTIC


    Temperature Monitoring

    Monitor the working temperature of the charger at all times, Once the safe temperature is exceeded,the charger will stop working immediately,and the charging system can be  auto-resumed when the temperature returns to normal.


    Automatically Repair Faults

    Smart chip can automatically repair common charging mistakes to ensure stable opera tion of the production.


    Complete Certification

    The product has passed all relevant certifications, ensuring that the product can be sold and used with confidence.


    Stand

    The product has a supporting stand,which is easy for installation and outdoor use without the walls.


    APP control

    All the charging parameters could be set and showed on the APP. It will be convenient for operation.Also the charging system will be upgrade through APP.


    PRODUCT DESCRIPTION


                   
    Remote control by APP

    Charging can be started or stopped via Bluetooth or WIFI



                   
    Charging History Record

    Query charging history anytime, anywhere



                   
    Charging Time Setting

    Freely set the charging time and duration



                   
    Grounding protection setting

    Freely set grounding protection or not


    CHARGING PARAMETER

    SETTINGS


    Charging parameter settings could berecorded in APP and auto used for each charging


    The 4 main charging parameter settingsinclude:


    1 . Current setting

    2 . Over voltage protection

    3 . Under voltage protection

    4 . Grounding setting

    CHARGING


    Could display the chargingduration and amount in each


    PRODUCT PICTURE


    STEPS FOR WIRING


    PLAN A:  

    If a power distribution box is used,the L1,L2,L3,N,and PE  ends of the input cable of the plug correspond to the L1,L2,L3,N,and PE ends of the circuit breaker respectively.



    PLAN B:  

    If the joint is connected , the two ends need to be connected note that L1, N and PE , corresponding to each other Crimping pliers ensure good contact at extrusion joint


    INSTALLATION INSTRUCTIONS


    Specification for electrical box at input: 

    ◎  The power distribution box at the input end of each AC charging pile shall be equipped with leakage air switch with rated current no less than 100A. 

    ◎  Select an adaptive molded case circuit breaker according to the current of the AC charging pile (32A required for a single AC pile). 

    ◎  Power cables for ac charging piles ( cables between air breakers and AC piles) must meet the rated capacity of at least 32A single - phase power is recommended. The recommended voltage range is AC230V±10% . 

    ◎  50Hz power supply, make use of 5*16mm²coppercorecable; Wheninstalling AC charging piles, ensure that the PE cables are properly grounded.


    INSTALLATION ICON


                    
                   


                   



                   



                     
                   



    STEPS FOR USAGE


                   


    1. Make sure the charging box is connected power.

                   


    2 . Connect the EV and the charging box with the EV charging cable.

                   


    3 .Use swipe card or APP to start.


                   


    4.The vehicle is charged normally

                   


    5.Click the APP or swipe the card to end

                   


    6.Unplug the device and wrap the cable around the hook.


    NOTE: 

    1. After the vehicle is fully charged,the device will automatically Stop charging. 2. Please read the instructions carefully before use.


    STANDARD


    ◎   IEC 61851-1:2017-02《Electric vehicle conductive charging system-Part 1: General requirements》

    ◎   IEC 62053-21:2003《Electricity metering equipment(a.c.)- Particular requirements-Part21:Static meters for active energy(classes 1 and 2 ) 》

    ◎   EN 50065-1:2001《 Signalling on low-voltage electrical installations in the frequency range3 kHz to 148,5kHz-Part 1:General requirements,frequency bands and electromagneticdisturbances》

    ◎   EN 50557:2011《 Requirements for automatic reclosing devices(ARDs)for circuit breakers-RCBOS-RCCBs for household and

    similar uses》

    ◎   IEC 60050-151:2001《 International Electrotechnical Vocabulary- Part 151:EIectrical and magnetic devices》

    ◎   IEC 60050-195:1998《 International Electrotechnical Vocabulary-Part 195:Earthing and protection against electric shock》

    ◎   IEC 60050-441:1984《 International Electrotechnical Vocabulary-Par 441:Switchgear,controlgear and fuses》

    ◎   IEC 60050-826:2004《 International Electrotechnical Vocabulary-Part 826:Electrical installations》

    ◎   IEC 62196-2:2011-10《 Plugs,socket-outlets,vehicle connectors and vehicle-Conductive charging of electric cehicles-Part2:

    ◎   Dimensional compatibility and interchangeability requirements for a.c.pin and contact-tube accessories》

    Basic Information
    • Year Established
      --
    • Business Type
      --
    • Country / Region
      --
    • Main Industry
      --
    • Main Products
      --
    • Enterprise Legal Person
      --
    • Total Employees
      --
    • Annual Output Value
      --
    • Export Market
      --
    • Cooperated Customers
      --
    Send your inquiry
    Chat with Us

    Send your inquiry

    Choose a different language
    English
    اردو
    Türkçe
    ภาษาไทย
    Magyar
    русский
    Português
    italiano
    français
    Español
    Deutsch
    العربية
    日本語
    한국어
    简体中文
    繁體中文
    Afrikaans
    አማርኛ
    Azərbaycan
    Беларуская
    български
    বাংলা
    Bosanski
    Català
    Sugbuanon
    Corsu
    čeština
    Cymraeg
    dansk
    Ελληνικά
    Esperanto
    Eesti
    Euskara
    فارسی
    Suomi
    Frysk
    Gaeilgenah
    Gàidhlig
    Galego
    ગુજરાતી
    Hausa
    Ōlelo Hawaiʻi
    हिन्दी
    Hmong
    Hrvatski
    Kreyòl ayisyen
    հայերեն
    bahasa Indonesia
    Igbo
    Íslenska
    עִברִית
    Basa Jawa
    ქართველი
    Қазақ Тілі
    ខ្មែរ
    ಕನ್ನಡ
    Kurdî (Kurmancî)
    Кыргызча
    Latin
    Lëtzebuergesch
    ລາວ
    lietuvių
    latviešu valoda‎
    Malagasy
    Maori
    Македонски
    മലയാളം
    Монгол
    मराठी
    Bahasa Melayu
    Maltese
    ဗမာ
    नेपाली
    Nederlands
    norsk
    Chicheŵa
    ਪੰਜਾਬੀ
    Polski
    پښتو
    Română
    سنڌي
    සිංහල
    Slovenčina
    Slovenščina
    Faasamoa
    Shona
    Af Soomaali
    Shqip
    Српски
    Sesotho
    Sundanese
    svenska
    Kiswahili
    தமிழ்
    తెలుగు
    Точики
    Pilipino
    Українська
    O'zbek
    Tiếng Việt
    Xhosa
    יידיש
    èdè Yorùbá
    Zulu
    Current language:English