EVCOME EV charging stations for better life---Top EV charging stations manufacturers & suppliers in China.
At evcome, technology improvement and innovation are our core advantages. Since established, we have been focusing on developing new products, improving product quality, and serving customers. ac charging station We will do our best to serve customers throughout the whole process from product design, R&D, to delivery. Welcome to contact us for further information about our new product ac charging station or our company.ac charging station Exquisite material selection, excellent workmanship, reliable quality, and strong bearing capacity, wear-resistant and scratch-resistant, anti-corrosion, anti-aging and other advantages, compared with similar products on the market, it has more outstanding advantages in appearance, performance, quality, etc. , the overall cost performance is higher.
| CHARGING PILE | EV CONNECTOR | CORE ADVANTAGE | ||
LCD screen Easy installation High touching Screen compatibility Waterproof grade: IP5 4 | Built in temperature monitoring Good conductivity | RCD: Type B | ||
| Small size, Easy to transport Multiple security protection Certified by authorities | PVC CABLE | Directional current regulation | ||
| Real- time monitor on temperature | Durable and anticorrosion Easy to bend, Long service life | Repair the disorder of capacitor units Full- link temperature monitoring system Strong Expansibility | ||
| High resistance to cold/ high temperature |
It allowing for interoperability between different charging station manufacturers and network operators.
One of the key features of OCPP 1.6J is its support for smart charging capabilities. This enables advanced functionalities such as load management, demand response, and dynamic pricing. With smart charging, charging stations can optimize their energy usage, respond to grid conditions, and provide value-added services to EV owners and grid operators.
OCPP 1.6J has gained widespread adoption and is supported by various vendors, charging network operators, and industry organizations. Its standardized nature promotes interoperability, scalability, and future-proofing of EV charging infrastructure. The protocol continues to evolve, with newer versions being developed to address emerging requirements and technologies in the rapidly evolving electric mobility sector.
LOGO in the Display
Product Name plate LOGO
Packing Box StickerCustomization
Manual CustomizationNOTE: The above customization has quantity requirements, please confirm with sales staff for details.
1. It has card swiping start and remote stop start, and is equipped with rechargeable IC card.
2. Reservation charging function, which can be charged regularly according to user needs, and it will automatically end when fully charged.
3. Equipped with display screen, real-time display of charging information estimation Fill time.
4. With overload protection, overvoltage protection, undervoltage protection,short circuit protection, overtemperature protection, emergency stop and other functions.
Temperature Monitoring
Monitor the working temperature of the charger at all times, Once the safe temperature is exceeded,the charger will stop working immediately,and the charging system can be auto-resumed when the temperature returns to normal.
Automatically Repair Faults
Smart chip can automatically repair common charging mistakes to ensure stable opera tion of the production.
Complete Certification
The product has passed all relevant certifications, ensuring that the product can be sold and used with confidence.
Stand
The product has a supporting stand,which is easy for installation and outdoor use without the walls.
APP control
All the charging parameters could be set and showed on the APP. It will be convenient for operation.Also the charging system will be upgrade through APP.
Charging can be started or stopped via Bluetooth or WIFI
Query charging history anytime， anywhere
Freely set the charging time and duration
Freely set grounding protection or not
CHARGING PARAMETER
SETTINGS
Charging parameter settings could berecorded in APP and auto used for each charging
The 4 main charging parameter settingsinclude:
1 . Current setting
2 . Over voltage protection
3 . Under voltage protection
4 . Grounding setting
CHARGING
Could display the chargingduration and amount in each
PLAN A:
If a power distribution box is used，the L1,L2,L3,N,and PE ends of the input cable of the plug correspond to the L1,L2,L3,N,and PE ends of the circuit breaker respectively.
PLAN B:
If the joint is connected , the two ends need to be connected note that L1, N and PE , corresponding to each other Crimping pliers ensure good contact at extrusion joint
Specification for electrical box at input：
◎ The power distribution box at the input end of each AC charging pile shall be equipped with leakage air switch with rated current no less than 100A.
◎ Select an adaptive molded case circuit breaker according to the current of the AC charging pile (32 A required for a single AC pile).
◎ Power cables for ac charging piles ( cables between air breakers and AC piles) must meet the rated capacity of at least 3 2 A single - phase power is recommended. The recommended voltage range is AC230V±10% .
◎ 50Hz power supply, make use of 5*16mm²coppercorecable; Wheninstalling AC charging piles, ensure that the PE cables are properly grounded.
1. Make sure the charging box is connected power.
2 . Connect the EV and the charging box with the EV charging cable.
3 .Use swipe card or APP to start.
4.The vehicle is charged normally
5.Click the APP or swipe the card to end
6.Unplug the device and wrap the cable around the hook.
NOTE:
1. After the vehicle is fully charged,the device will automatically Stop charging. 2. Please read the instructions carefully before use.
◎ IEC 61851-1:2017-02《Electric vehicle conductive charging system-Part 1: General requirements》
◎ IEC 62053-21:2003《Electricity metering equipment(a.c.)- Particular requirements-Part21:Static meters for active energy(classes 1 and 2 ) 》
◎ EN 50065-1:2001《 Signalling on low-voltage electrical installations in the frequency range3 kHz to 148,5kHz-Part 1:General requirements,frequency bands and electromagneticdisturbances》
◎ EN 50557:2011《 Requirements for automatic reclosing devices(ARDs)for circuit breakers-RCBOS-RCCBs for household and
similar uses》
◎ IEC 60050-151:2001《 International Electrotechnical Vocabulary- Part 151:EIectrical and magnetic devices》
◎ IEC 60050-195:1998《 International Electrotechnical Vocabulary-Part 195:Earthing and protection against electric shock》
◎ IEC 60050-441:1984《 International Electrotechnical Vocabulary-Par 441:Switchgear,controlgear and fuses》
◎ IEC 60050-826:2004《 International Electrotechnical Vocabulary-Part 826:Electrical installations》
◎ IEC 62196-2:2011-10《 Plugs,socket-outlets,vehicle connectors and vehicle-Conductive charging of electric cehicles-Part2:
◎ Dimensional compatibility and interchangeability requirements for a.c.pin and contact-tube accessories》
Regarding the attributes and functionality of the ac charging station, it is a kind of product that will always be in vogue and offer consumers limitless benefits. It can be a long-lasting friend for people because it is constructed from high-quality raw materials and has a lengthy lifespan.
The application of the QC process is crucial for the quality of the final product, and every organization needs a strong QC department. ac charging station QC department is committed to continual quality improvement and focuses on ISO Standards and quality assurance procedures. In these circumstances, the procedure may go more easily, effectively, and precisely. Our excellent certification ratio is a result of their dedication.
The buyers of ac charging station come from many businesses and nations around the world. Before they begin working with the manufacturers, some of them may reside thousands of miles away from China and have no knowledge of the Chinese market.
Yes, if asked, we will supply relevant technical details regarding evcome. Basic facts about the products, such as their primary materials, specs, forms, and primary functions, are readily available on our official website.
SHANGHAI YINGRAO TECHNOLOGY CO., LIMITED always considers communicating through phone calls or video chat the most time-saving yet convenient way, so we welcome your call for asking for the detailed factory address. Or we've displayed our e-mail address on the website, you are free to write an E-mail to us about the factory address.
In essence, a long-standing ac charging station organization runs on rational and scientific management techniques that were developed by smart and exceptional leaders. The leadership and organizational structures both guarantee that the business will offer competent and high-quality customer service.
