What is the difference between cable towline cables and tow cables?

2023/06/21
Author: EVCOME-EV Chargers Manufacturers

Although the difference between drag chain cable and drag chain cable is just a word, they are different. Today I mainly explain the definition of cable drag chain cables. The components and their application scenarios, let us master together. Definition of towline cables: In places where mechanical equipment modules must move back and forth, in order to better avoid cable entanglement, damage, breakage, suspension and dispersion, the cables are often placed in cable towlines to maintain the cables, and the cables can be The cable drag chain is constantly moving. This kind of high-rigidity special cable can move back and forth with the tank chain and is not easy to be damaged. It is called cable drag chain cable, and it can also be generally called tow cable and tank chain cable. Cable drag chain cable components: 1. The center of compressive strength. In the center of the cable, according to the total number of cable types and the crossing range of each copper wire, fill the real center line to the maximum (rather than the waste copper core cable made of some fillers or waste plastics in general), which can be reasonably Maintain strand structure and avoid strand dispersion into the cable center area. 2. Electric conductor structure. Cables should be chosen with very flexible conductors. Generally speaking, the denser the conductors, the more flexible the cable will be, but too thin a conductor will cause the cable to coil up. A series of long-term tests resulted in better diameter, length and direction shielding with the best working ability for compressive strength. The difference between the cable drag chain cable and the towing cable is introduced in detail. 3. Copper core cable insulation layer. The insulation layers in the cable cannot be glued together. Insulation also needs to support each individual transmission line. Therefore, in the whole process of using the drag chain cable with millions of meters of cables, only the stability of high-voltage PVC or TPE raw materials can be confirmed. 4. Stranded wire The stranded wire structure must be wound around a stable compressive strength center with an optimal exchange diameter. As we all know, due to the use of insulating materials, the twisted wire structure should be designed according to the state of motion, gradually selecting the entire twisted wire from 12 copper core cables. 5. Inner Sheath Armor Extruded inner sheath replaces cheap cashmere raw materials, padding or additional padding. This can ensure that the twisted wire structure is not easy to disperse. 6. Shielding From the perspective of improved weaving, loose plastic ropes will reduce the EMC protection ability, and the shielding will be quickly invalidated due to shielding rupture. The hand-woven shield is twist-resistant. 7. The outer sheath The outer sheath made of different improved materials has different functions, such as anti-ultraviolet, low temperature resistance, acid and alkali resistance and cost increase. But all of these outer sheaths have the same point, high abrasion resistance and not clinging to anything. The outer sheath must have high toughness, but also have support points, which should naturally be formed under high pressure. As a new generation of high-toughness adjustment and connection cables, cable drag chain cables are constantly moving the installation site under the pressure of basic mechanical equipment, and the bending radius is as small as 7.5x diameter. Used for cable drag chains or carrying intelligent robot components, it can be used in wet and cold conditions; in the appropriate application temperature range, it can be used outdoors to block ultraviolet rays; shielded cable drag chain cables are hand-braided with fine electro-tinned copper wires for shielding, Places with high anti-interference signal requirements; suitable for detection and control routes, electrical equipment engineering drive routes, installation and automation technology, assembly lines, production lines, especially CNC lathes and transmission lines. .

Recommend:

Wallbox EV Charger

Wall Box DC Charger

Portable EV Charger

EV Charging Cable

EV Charger Connectors

EV Charger Adapter



CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
اردو
Türkçe
ภาษาไทย
Magyar
русский
Português
italiano
français
Español
Deutsch
العربية
日本語
한국어
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
Pilipino
Українська
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English