Author: EVCOME-EV Chargers Manufacturers
The van can use a 120kw charging pile, and the charging time is determined by the BMS power management system of the van, not by the charging pile! 120kw is the maximum charging power that the charging pile can provide for one hour, which does not mean that the van can really accept such a large power. Some vans have marked fast charging for half an hour in the instructions before leaving the factory. If you read the instructions carefully, you can find the problem. It can be said that if the battery capacity of the van is 60 kilowatt-hours, no matter you use 120kw, 180kw or even 240kw, it will take half an hour. High power is mainly used for charging some large vehicles such as buses and new energy dump trucks. 120kw charging pile product features: 1. Realize card swiping, billing, deduction control charging, identity recognition and information encryption to ensure customer information security. 2. It has lightning protection to ensure the safety of users. 3. The protection level is as high as IP54 to ensure the safety of users. 4. It has charging link monitoring and alarm function to ensure charging safety. 5. It has safety protection functions such as side overcurrent and short circuit protection to ensure circuit safety. 6. Lixian provides low-voltage auxiliary Youyuanzhi BMS communication for the electric vehicle. The charging power of the van at the charging pile depends on two values: how much power is required by the BMS, and how much power the charging pile can supply. Basically just take the smaller one. The DC pile has an integrated machine and a split machine. The nominal power of the charging pile may be very high, which is of little significance. A 120kw DC double-gun charging pile is charged, and the single-gun charging is 120kw power output, and when the two guns are charged at the same time, each gun is 60kw.
Recommend: