1. Product overview: Rubber sheath cable is a soft and movable cable variety, made of multiple thin copper wires, covered with rubber insulation and rubber sheath. Generally, it includes general-purpose rubber-sheathed flexible cables, welding machine cables, submersible motor cables, radio device cables, photographic light source cables, etc. 2. Product classification: Rubber sheathed cables are widely used in various electrical equipment, such as household appliances, motors, electrical equipment and mobile power cords for electrical appliances. At the same time, it can be used in indoor or outdoor environmental conditions. According to the mechanical external force of the wire and cable, the product structure is divided into three categories: light, medium and heavy. There is also proper articulation in section. 1. Household appliances and small electrical equipment use light rubber-sheathed cables (YQ cables, YQW cables), which require softness, lightness, and good bending performance; 2. Medium-sized rubber-sheathed cables (YZ cables, YZW cables) are widely used in Agricultural electrification; 3. Heavy-duty cables (YC cables, YCW cables) are used in port machinery, searchlights, household large-scale hydraulic drainage and irrigation stations, etc. The product has good versatility, complete series of specifications, good performance and stability. 4. Waterproof rubber-sheathed cables (JHS cables, JHSB cables), JHS waterproof rubber-sheathed cables are used to transmit electric energy to submersible motors with an AC voltage of 500V and below. Under long-term water immersion and high water pressure, it has good electrical insulation performance. The waterproof rubber-sheathed cable has good bending performance and can withstand frequent movements. 5. Welding machine cables (YH cables, YHF cables) are suitable for electric welding machines whose ground voltage AC does not exceed 200V and pulsating DC peak value 400V. It is a special cable suitable for the secondary side wiring of electric welding machines and electric welding clamps. The rated voltage AC does not exceed 200V, and the peak value of pulsating DC is 400V. The structure is a single core, which is made of multi-strand flexible wires. The wire core is wrapped with a heat-resistant polyester film insulation tape, and the outermost layer is protected by a rubber insulation sheath. .
Recommend: