Author: EVCOME-EV Chargers Manufacturers
How to install charging piles in the middle parking space not against the wall? If the charging pile is installed in the middle parking space not against the wall, you can choose a vertical charging pile with a protection level that meets IP54. The ambient temperature must be between -25°C and +50°C, and the vertical inclination of the installation should not exceed 5%. The installation site must not have explosive hazardous media , the surrounding medium does not contain harmful gases and conductive media that corrode metals and damage insulation. Safety requirements for charging pile installation: 1. Substations should be equipped with safety barriers, warning signs, safety lights and alarm bells. 2. The door of the high-voltage power distribution room and the transformer room or on the safety column of the substation should be hung“STOP, HIGH VOLTAGE HAZARD”warning sign. Warning signs must face the outside of the fence. 3. There should be obvious operating instructions on the high-voltage power distribution device. The grounding point of the equipment shall be clearly visible. 4. There should be obvious indoor“Exit”or“exit”nameplate. Reminder: You need to apply to the property department for the installation of charging piles, because the installation of charging piles requires the cooperation of the property department and the wiring needs to be changed. Then apply to the local power supply company. After the power supply company approves, you can contact an electrician for installation.
Recommend: