In the process of implementing the integrated wiring project, we often encounter some problems. For example, what are the common faults of control cable lines, and what we need to pay attention to when using them. Today, Xiaobian tells you the precautions when using control cables. Precautions for the use of control cables: 1. When the control cables are sporadically cut and shipped, the wires should be tightened at 60-80mm at both ends of the cutting point before cutting to avoid loosening of the cable protective layer. 2. Do not straighten the cable by falling down when the temperature is low in winter to avoid insulation. Sheath is cracked. 3. Control cables can be used to regulate LAN cables, not directly exposed to sunlight or ultra-high temperature, and the use of pipes, ultraviolet rays (ultraviolet rays) is advocated——Do not use cables without UV protection in direct sunlight. 4. Try to avoid storing control cables in the open air, and the cable reels must not be laid flat. 5. The control cable should be rolled regularly during storage (every 3 months in summer, and can be extended as appropriate in other seasons). When rolling, roll the storage pan down to keep the bottom from getting damp and rotting. When storing, always pay attention to whether the cable sealing head is intact. The above content is some aspects that should be paid attention to when using the control cable. In order to ensure the safety of the later use, the maintenance and precautions of the control cable must be done well. .
Recommend: